English 
Find The Right Column For Your Application
Búsqueda
No tienes artículos en tu carrito de compras.
Thermo Fisher SPE cartridge equivalent - HyperSep
GL Sciences Equivalent for Thermo Fisher SPE cartridges
InertSep SPE columns from GL Sciences are designed for easy and cost-effective preparation of laboratory samples. With a wide variety of polymer and silica-based sorbents, InertSep SPE columns allows you to prepare samples with the exact separation mode and chemistry needed.
Available in multiple formats:
 Cartridge |  Large-size cartridge |  Luer Device Type |  96-Well Plate |
For effective extraction of a wide variety of compounds from non-polar to high-polarity using a hydrophilic-lipophilic balanced phase
InertSep HLB
InertSep HLB is a composite polymer solid phase of N-containing vinyl polymer and styrene divinylbenzene. By optimizing the balance between hydrophobicity and hydrophilicity with a unique synthetic technology, InertSep HLB can retain and elute compounds with a wide range of polarities.
Available in several particle sizes for different flow requirements.
| InertSep HLB | InertSep HLB FF | |||||
| Average particle diameter (μm) | 30 | 60 | ||||
| Surface area (m2/g) | 720 | |||||
| Pore volume (mL/g) | 1.3 | |||||
| Fine pore size (nm) | 7 | |||||
| pH range of use | 1-14 | |||||
High-efficiency reversed phase extraction with a highly end-capped C18 phase
InertSep C18
Recommended GL Sciences equivalent for Thermo Fisher HyperSep C18
InertSep C18 is a silica-based sorbent modified with C18 for non-polar interactions. With our high-level end-capping technology, cation exchange by interaction with the residual silanol groups is suppressed, which reduces adsorption of basic compounds. This sorbent is suitable for removing lipid in simultaneous analysis of pesticide residues in agricultural products.
Available in several particle sizes for different flow requirements.
| InertSep C18 | InertSep C18 FF | |||||
| Average particle diameter (μm) | 60 | 120 | ||||
| Carbon Load (%) | 19 | |||||
| Surface area (m2/g) | 450 | |||||
| Pore volume (mL/g) | 0.7 | |||||
| Fine pore size (nm) | 6 | |||||
| pH range of use | 2-8 | |||||
2x4 Method Phases
GL Sciences provides several mixed-mode SPE sorbents for use with the 2x4 Method. GL Sciences SPE phases feature stable holding power, excellent permeability and selection of particle sizes including large diameters with high flow-rate ideal for sample pre-treatment.
| InertSep MCX FF | InertSep MAX FF | InertSep WCX FF | InertSep WAX FF | |
| Recommended equivalent to | HyperSep Retain CX | HyperSep Retain AX | ||
| Functional group | ―SO3- | ―N-(CH3)3 | ―COO- | ―NR2 |
| Learn More | Learn More | Learn More | Learn More | |
| Average particle diameter (μm) | 70 | |||
| Surface area (m2/g) | 480 | |||
| Pore volume (mL/g) | 1.1 | |||
| Fine pore size (nm) | 9 | |||
| pH range of use | 1-14 | |||
| Ion exchange capacity (meq/g) | 1.2 | 0.3 | 1.2 | 0.7 |
| Thermo Fisher | Base Gel | Mode | InertSep |
Polymer based | Reversed Phase | InertSep HLB | |
| InertSep PLS-3 | |||
| InertSep Pharma | |||
| HyperSep Retain PEP | EZ Cartridge RP-1 | ||
| InertSep PLS-2 | |||
| HyperSep Retain CX | Ion Exchange | InertSep MCX | |
| InertSep WCX | |||
| HyperSep Retain AX | InertSep MAX | ||
| InertSep WAX | |||
| HyperSep C18 | Silica based | Reversed Phase | InertSep C18 |
| InertSep C18-B | |||
| InertSep C18-C | |||
| HyperSep C8 | InertSep C8 | ||
| InertSep C2 | |||
| InertSep CH | |||
| HyperSep Phenyl | InertSep PH | ||
| HyperSep Cyano | Normal Phase | InertSep CN | |
| HyperSep Diol | InertSep 2OH | ||
| HyperSep Silica | InertSep SI | ||
| HyperSep Carboxylic acid(WCX) | Ion Exchange | InertSep CBA | |
| InertSep PRS | |||
| HyperSep SCX | InertSep SCX | ||
| InertSep SCX-2 | |||
| HyperSep Aminopropyl (WAX) | InertSep NH2 | ||
| InertSep PSA | |||
| HyperSep SAX | InertSep SAX | ||
| InertSep SAX-2 | |||
Polar | InertSep AL-A | ||
| InertSep AL-N | |||
| InertSep AL-B | |||
| HyperSep Florisil | InertSep FL | ||
| InertSep FL-PR | |||
Others | Special | InertSep AC | |
| HyperSep Hypercarb | InertSep GC | ||
| InertSep DRY | |||
| HyperSep SLE | InertSep K-solute | ||
| InertSep GC/PSA | |||
| InertSep GC/NH2 | |||
| InertSep GC/SAX/PSA | |||
| InertSep SAX/PSA | |||
| InertSep DNPH | |||
| HyperSep SLE | Phospholipid Remover | ||
| FastRemover MF (0.2um filter) | |||
| Pierce Protein Precipitaion plate | FastRemover for Protein | ||
| HyperSep SLE Plates | FastRemover for Phospholipid | ||
| InertSep PCB |
Thousands of applications notes available. Search by compound, category, phase and more.
Filters